Crimp Lug－bosema47

Crimp Lug

Hello, I just bought 2 - 4 foot sections of 1/0 Copper cable from the Home Depot and 4 Crimp on lugs.The key to an acceptable crimp joint is that it must be "gas tight" -- the metal of the wire and the crimp lug are pressed so intimately together that if it were the lid of food can, it would be an hermetic seal..jaycar. 2. The guy at home depot said I could use a punch and hammer to crimp them or solder or braze them on..hydraulic crimping tool - 10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool 9.What seems like just a simple question, until you get the answers - is there any trick to crimping the lug on a welding lead? Do you need no-ox or anything? Just crimp with a vise, hammer, or ? ? ? My LWS said to use a larger& crimp lug I just bought a "Hammer" style lug crimp tool.au/productView. Expensive hex crimper. You place the lug with wire inserted into it, and hit it with& . I do know that the& .Been experimenting with lighting. Best brand/place to get them? Method of attachment: 1..

Been experimenting with lighting. Best brand/place to get them? Method of attachment: 1... I ordered the cable a bit too long, and am shortening it by a couple feet. Buy the "fusion" terminals& ..Dropped into J R Turke today, to buy some forked spade crimp lugs, a bit like there http://www.

Buy the "fusion" terminals& ..Dropped into J R Turke today, to buy some forked spade crimp lugs, a bit like there http://www.. To get the best joint, the crimp lug should& . With this powerful crimper, you can crimp wires and butt connectors much easier.. With the number of& . The crimper tool crimps AWG 12 to 2/0&

With this powerful crimper, you can crimp wires and butt connectors much easier.. With the number of& . The crimper tool crimps AWG 12 to 2/0& .When you`re installing welding leads, a copper lug is very important for attaching the leads to the welder and the ground clamp.Hello, I just bought 2 - 4 foot sections of 1/0 Copper cable from the Home Depot and 4 Crimp on lugs.The key to an acceptable crimp joint is that it must be "gas tight" -- the metal of the wire and the crimp lug are pressed so intimately together that if it were the lid of food can, it would be an hermetic seal..jaycar